Wood Guard Primer, green

Protective concentrate 1:4 for wood

Volume:	1 L
EAN:	4751025760481

Concentrated product, to be diluted with 4 parts water. For wooden construction protection. The product is absorbed deep into wood, contains active ingredients against wood degrading microorganisms and deterioration of wood appearence, also wood damaging instects. Controls moisture content in wood and improves the adhesion for substrates and paints. Odorless after drying. For use in exterior work, used for wood constructions not in direct contact with the soil and above ground water – facades, window frames, doors, fences, wind boxes, terraces, planks, roof structures and so on.

Instructions:

The surface to be treated must be clean and dry. New wood constructions do not require gloss treatment. Clean previously painted surfaces with a builder's hair dryer, scraper or paint remover until the old paint film is completely removed. Old woods need to be sanded and weathered layers to a healthy tree. Wood should not be frozen during processing. For best results, apply with a synthetic brush, evenly 2-3 times in the direction of wood fibers. Each subsequent coat should only be applied after the previous coat is completely dry. Use immersion or spraying methods in closed facilities for professional application. Drying time - 12 hours at ambient air temperature + 20 ℃ and relative air humidity not more than 65%. The treated surface can be painted after 24 hours. Low temperatures and increased humidity, as well as the use of different types of wood in the construction, can increase the drying time.

Warnings:

• P102: Keep out of reach of children.
• P262: Do not get in eyes, on skin, or on clothing.
• P301 + P312: IF SWALLOWED:Call a POISON CENTER/ doctor/…/if you feel unwell.
• P05 + P351 + P3338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.